The models of our belt bag conveyor can meet a variety of vehicle handling needs. For example, GC T3-3/4 can be used for the handling of small vans. GC T3-6/8.4 would be the best for 9.6-meter containers or trucks of similar length. All the models can choose a belt width of 600mm or 800mm.
The models of our hydraulic conveyor can meet a variety of vehicle handling needs. For example, GCT4-6/12.3 would be the best for 13.5-meter trucks or containers of similar length. GC T4-7.5/16 would be the best for 17.5-meter trucks or containers of similar lengths. All the models can choose a belt width of 600mm or 800mm
The GC T5-6/16 Mobile Boom Conveyor is suitable for less than or equal to 17.5-meter trucks with limited space. GC T5-7.5/21 would be best for heavy-cargo logistics handling.
Angle belt conveyors are intended primarily for the transport of piece goods where there is a need to change the elevation angle of material flow or the individual levels of material flow. The Guanchao 角度付きベルトコンベア applies the advanced technology of a low-tension driving belt to smooth the merging or diverging of cargo between two conveyors and to minimize the accumulated heat on the angle bar, thus increasing the durability of the belt.
The shortest distance between two points is a straight line. Sometimes, due to the constraints of space and other factors, the package cannot be transported in a straight line, and the direction needs to be adjusted. At this time, a turning curve belt conveyor is required.
