Productos

The models of our hydraulic conveyor can meet a variety of vehicle handling needs. For example, GCT4-6/12.3 would be the best for 13.5-meter trucks or containers of similar length. GC T4-7.5/16 would be the best for 17.5-meter trucks or containers of similar lengths. All the models can choose a belt width of 600mm or 800mm

Angle belt conveyors are intended primarily for the transport of piece goods where there is a need to change the elevation angle of material flow or the individual levels of material flow. The Guanchao cinta transportadora en ángulo applies the advanced technology of a low-tension driving belt to smooth the merging or diverging of cargo between two conveyors and to minimize the accumulated heat on the angle bar, thus increasing the durability of the belt.

The vertical spiral belt conveyor consists of a moving belt which revolves around a central column. It can be used to move a wide range of products between floor levels or over walkways. The belt guide system runs on precision bearings so there is only rolling friction and noise level is very low.