News Center


Article Category


contact info

7 Tips for Maintaining and Troubleshooting Your Belt Conveyor Crown

Belt Conveyor Crowns (also known as pulleys) are an important part of a conveyor system, and need to be properly maintained and inspected to ensure they are running properly and safely. Here are 7 tips to help you maintain and troubleshoot your belt conveyor crowns:

1. Check for Proper Lubrication

The belt conveyor crown should be regularly checked for proper lubrication levels. If there is too little or no lubrication, this can cause excessive wear and tear. Make sure to follow the manufacturer’s instructions for the lubrication method and frequency for your belt conveyor crowns.

2. Inspect for Proper Alignment

Make sure that all of the components of the belt conveyor crowns are properly aligned. If there is an issue with the alignment of the conveyor crowns, it will cause the conveyor to not run as it should.

3. Watch for Unusual Noises

Pay attention for any unusual sounds that may be coming from the conveyor. Unusual sounds can indicate an issue with the belt conveyor crowns, such as misalignment or a worn bearing.

4. Make Sure That All Guards Are in Place

Check to make sure that all of the safety guards are in place on the belt conveyor crowns. If a guard is not in place or missing, immediately stop the conveyor and make the necessary repairs.

5. Look for Signs of Wear and Tear

Be sure to inspect the belt conveyor crowns for any signs of wear and tear, such as cracks, frayed edges, or deformation. If a part is damaged, it should be replaced right away.

6. Monitor Belt Tension Levels

Make sure that the belt tension is set properly. If the belt is too tight, it can cause the conveyor to be inefficient. If the belt is too loose, it can be dangerous as conveyor components can slip or fall off.

7. Perform Regular Maintenance

Have a maintenance plan in place for regularly inspecting and maintaining the belt conveyor crowns. This will help to ensure that the conveyor is running safely and efficiently.


Maintaining and troubleshooting your belt conveyor crowns is an important part of a safe and efficient conveyor system. By following the 7 tips discussed above, you can ensure that your conveyor system is running safely and efficiently.

What is 7+4?