Telescopic conveyor for loading and unloading is an indispensable economical logistics conveying equipment that forms a rhythmic assembly line. So how to use the belt telescopic conveyor correctly?
According to its conveying capacity, telescopic conveyor for loading and unloading can be divided into heavy-duty belt telescopic conveyor such as mining belt telescopic conveyor, light belt telescopic conveyor such as used in electronic plastics, food light industry, chemical and pharmaceutical industries.
Telescopic conveyor for loading and unloading has strong conveying capacity, long conveying distance, simple structure and easy maintenance, and can easily implement programmed control and automatic operation.
1. Select the corresponding belt width according to its own transportation volume. During the process of transporting materials, the machine must keep the belt conveyor continuously within its load range.
2. Do a good job in the maintenance of the belt in peacetime, and do a good job in the repair and maintenance of the belt conveyor, which will improve the operation efficiency of the belt conveyor. The overhaul and maintenance of the belt conveyor is mainly carried out for the four major parts of the belt conveyor cleaner, the belt itself, the power device and the electrical protection device.
(1) The belt conveyor cleaner should be regularly inspected and cleaned, and pay attention to see if there is any material left when transporting goods. At the same time, if the cleaner presses the belt or the surface of the drum too tightly or the clearance is too large, it may cause damage to the belt or reduce the cleaning effect.
(2) When the belt itself is transported, the material should be placed on the belt evenly and properly. Uneven placement will cause the belt to deviate during operation, thereby causing wear to the belt. The belt deviation and abnormal wear will cause the life of the belt. The main reason for the shortening, so the use effect is not good.
(3) The maintenance of the power unit requires mechanical and electrical maintenance personnel, who often observe the grease lubrication and heating conditions of these components. During the observation, if oil leakage or lubricating oil penetration is found in these equipment, the cause should be checked in time, and the Replenish grease at the leaked parts; for equipment that is abnormally hot, it should be shut down for maintenance in time to check the cause to avoid accidents.
(4) Protect the electrical equipment to prevent accidental damage. At the same time, it is also necessary to improve the professional quality of the operator. After all, the machine needs to be operated manually, so the operator has played a crucial step.
Overhaul of telescopic conveyor for loading and unloading
- When overhauling the unloading roller part of the machine head, it is necessary to stop the operation of the machine.
- When the belt conveyor is running, it is forbidden to clean the head, tail drum and the surrounding areas.
- When overhauling, dealing with faults or doing other work on the belt conveyor, the control switch of the conveyor must be turned off, the warning sign must be hung, and the emergency stop button must be pressed.
- When handling the deviation of the conveyor belt, it is strictly forbidden to directly contact the conveyor belt with hands, feet and other parts of the body.
- Always check the fire protection and spray dust suppression facilities in the tunnel of the belt conveyor and keep them in good condition.
Safety operating procedures for telescopic conveyor for loading and unloading
- The fixed belt conveyor should be installed on a fixed foundation according to the specified installation method. Before the mobile conveyor is officially running, the wheels should be wedged with triangular wood or braked with brakes. In order to avoid walking during work, when there are multiple conveyors operating in parallel, there should be a one-meter channel between machines and between machines and walls.
- Before using the telescopic conveyor for loading and unloading, it is necessary to check whether the running parts, the tape buckle and the load-bearing device are normal, and whether the protective equipment is complete. The tension of the tape must be adjusted to the proper level before starting.
- Telescopic conveyor for loading and unloading should be started with no load. Wait until the operation is normal before feeding. It is forbidden to drive after feeding.
- When there are several conveyors running in series, they should start from the discharge end and start sequentially. After all the normal operation, the material can be fed.
- When the tape deviates during operation, it should be stopped and adjusted, and it should not be used reluctantly, so as not to wear the edge and increase the load.
- The temperature of the working environment and the material being sent shall not be higher than 50℃ and lower than -10℃.
- Pedestrians or passengers are prohibited on the conveyor belt.
- The feeding must be stopped before parking, and the parking can be stopped after the material on the belt is discharged.
- The motor of telescopic conveyor for loading and unloading must be well insulated. Do not pull and drag the mobile conveyor cables randomly. The motor should be grounded reliably.
- When the belt slips, it is strictly forbidden to pull the belt by hand to avoid accidents.
Jiangsu Guanchao Logistics Technology is a professional curve conveyor factory. We have a professional engineering team, which can customize the equipment according to the actual use requirements. Our products effectively help our customers improve their shipping efficiency, faster processing time and reduce labor costs. We have a professional after-sales team to support customers in using our machines and ensure their stable operation. You are welcome to come to consult.